Product Description
BDS 2001-2010 Chevy/GMC 2500/3500 4WD 7" Lift Kit
BDS Suspension Chevrolet/GMC 4WD 7" Lift Kit for 01-10 2500 HD Silverado/Sierra 3/4 ton & 1 ton pickup.
This unique High Clearance suspension lift kit utilizes high arched crossmembers that blend perfectly with the angle of the factory installed lower control arms for a completely integrated look while lifting your vehicle a full 7"dramatically increasing ground clearance at the front crossmembers and improving operating geometry. Torsion bars are mounted directly to the top of the lower a-arm eliminating the need to drop the torsion bar crossmember.
A front skid plate and differential skid plate come standard, to lock everything together, creating a nearly indestructible sub frame for extreme off road protection.
The rear is lifted with a flat 5" block for easy installation. Upgrade to Glide-Ride Leaf Springs for reduced axle wrap and more control while towing.
This highly customizable kit gives you the choices you need to build your rig your way. With standard or narrow track knuckles, gas shocks and dual steering stabilizers as just a few of the options and upgrades available for this 7" Chevy/GMC suspension lift kit.
Check out the install article done by Four Wheeler Magazine.
Tire & Wheel Combinations
2001-2007 Classic Body Style
35" x 12.50" w/16 x 8 and 4-1/2" back spacing
35" x 12.50" w/17 or 18 x 9 and 5.5" back spacing
37" x 12.50" w/20 x 9 and 5.75" back spacing
2007-2010 New Body Style
35" x 12.50" w/16 x 8 and 4-1/2" back spacing
35" x 12.50" w/17 or 18 x 9 and 5.5" back spacing
35" x 12.50" w/20 x 9 and 5.75" back spacing
Tire & Wheel Combinations
*Trimming may be required*
- Est. Installation: 8-10 hours
- Difficulty Level (easy 1 - 5 complicated): 4
- View complete Vehicle Fitment Information here
Important Kit Notes
- 1. Torsion Bar tool required to load/unload the torsion bars.
- 2. Some welding required.
- 3. Requires frame bracket modification and differential mount modification.
- 4. Traction bars will NOT fit standard cab/short box models and are designed to work on vehicles with 4" to 8" of lift. Will NOT work on long bed models.
- 5. 20" wheels with 5" to 5-3/4" backspacing recommended to reduce trimming.
- 6. Gas models require exhaust modification.
- 7. Narrow track knuckle will slightly increase turning radius.
- 8. For tail high stance use #119157 add-a-leaf with the block kit or #069207 with leaf spring kit.
- 9. Dually applications will require custom u-bolts.
