SDP Twin Turbo Coolant Tank 01-07 LB7/LLY/LBZ

This corner mount SDP tank is nothing but perfect. Fitment was spot on with the stock mounting holes. Powdercoat was very clean! Used factory cap which is nice. Also came with a nice coolant sensor that was easy to wire in. I added onto factory coolant feed 1” to get a clean install and ease of switching back if I ever wanted to. Sensor Wiring: Arrow Up on sensor. Cut 4” back on old plug to ensure I had extra to return to stock if I ever wanted. Soldered and heat shrank a new 2 plug connector onto both sides. For easy installation you will need: 1” male/male barb 1’ of 1” heater hose 2.5’ of 1/2 heater hose 2.5’ of 3/8 heater hose 3-1” hose clamps 2-1/2” hose clamps 1-3/8” hose clamp 1 gallon coolant, clamp stock lines before removing to keep coolant loss to minimum!

Adding the coolant tank makes it much easier to route coolant lines and make sure all the sensors are working. It also really compliments the look of the twins. and fits in the corner of the fender well next to the turbo perfectly! Scott makes awesome products and will do everything he can to help.